We clean the paving, put the kiln-dried sand back where it belongs, then seal the joints so they set firm. Most drives are done in a day, and you know the cost before we start. From £4 per square meter to clean and sand, £10 per square meter to clean sand and seal.
20+ Years
Of Experience
Fully Insured
£5M Public Liability
Yorkshire-Wide
Otley, Leeds, Harrogate
Owner-Led
Guaranteed Quality
Sealing your driveway can be the most effective way to keep the weeds at bay. Block paving driveways are notoriously high maintenance. Each joint is filled with kiln dried sand to stabilise the blocks and stop any movement.
This looks great when installed, or when it’s just been cleaned. However, as airborne seeds naturally fall into the sand, they become a breeding ground for algae, moss and worst of all – weed growth!
As a homeowner you may have spent many hours scraping out the joints or maybe spraying weed or moss killers.
SMARTER DRIVEWAY CARE
Where sand has thinned, airborne seeds and loose debris find room to gather. Left unchecked, they can turn clean-looking paving into a patchwork of unwanted growth.
A TIDIER, CLEANER DRIVE
Rain, traffic and regular cleaning gradually erode the sand between blocks. Replenishing it helps support the paving and keep the joints neat.
SUPPORT BETWEEN BLOCKS
Algae, grime and weather can dull concrete blocks. A deep clean reveals the surface again; a compatible sealant can enrich the colour and help protect the finish.
REFRESHED COLOUR
UV exposure, rain and frost place ongoing stress on concrete paving. The right sealant can help guard against weathering and surface erosion.
PROTECTION FROM THE ELEMENTS
‘Sealing’ the joints means saturating them with an acrylic based resin product. Once cured the sand becomes rock hard, and in theory should never have to be disturbed.
You can even use a pressure washer and it will not upset them. This stops seeds settling in the sand and it stops weeds taking root. It creates a solid base which is much easier to maintain.
The sealant also soaks into the concrete blocks and protects the blocks surface from erosion and UV damage.
Sealing block paving does cost substantially more than just cleaning- current rates are approximately £4 per square meter to clean and sand, £10 per square meter to clean sand and seal. However, long term value should always be weighed up.
Factors to consider are –
The environment eg surrounding trees and foliage- We recommend sealing on drives surrounded by trees or where weed growth is likely
Density of vehicular traffic- Heavy frequent wear and tear from cars will quickly erode the concrete blocks so sealing will help protect them
Long term dwelling- If you are likely to be selling the property it will be more cost effective to clean and sand only
We can come to see your driveway and discuss your particular circumstances and needs.
Patterned Imprinted Concrete is a fantastic product which looks great on installation. It is very hard wearing but like anything needs maintaining.
We can clean, restore re seal and protect your PIC driveway using Smartseal’s professional grade products.
If your driveway looks tired or even looks failed beyond repair, don’t worry it may just need some attention and quality product
Read genuine feedback directly from homeowners and commercial facilities managers across our region.
Richard Wheat
Don Electronics Ltd
“Luke and his PureGem team carried out a full external clean – roof, gutters, uPVC window frames, render and stone walls, yorkshire paved drive and paths around the house. The transformation was amazing. Everything came up pristine. Very happy with the results. Five star job – highly recommended.”
Nick Firbank
Margaret Hall
Chris Woodhead
Based in Otley, PureGem provides responsive, professional driveway sealing service across Leeds, Harrogate, Bradford, Ilkley, and surrounding towns throughout West and North Yorkshire. We provide same-week survey visits and fast, written estimates.
KEY COVERAGE Areas:
Often, yes. Send us a few clear photos, your postcode and approximate dimensions. That helps us understand the surface and likely scope. If the condition, access or an existing coating needs a closer look, we may recommend a site visit before confirming the work.
Please move vehicles and portable items off the driveway and make sure the work area is accessible. If anything else is needed for your particular surface or site, we will confirm it with you in advance.
Keep vehicles off until the sealant has fully cured. The exact curing time depends on the product and conditions, so we will give you clear, product-specific guidance before the work starts.
We monitor conditions and, if rain or temperature could compromise the finish, we will postpone the sealing application and keep you informed.
Possibly. Existing coatings vary, and peeling, wear or trapped moisture can affect how a new coat performs. If you know what was used or when it was last sealed, let us know; we will assess compatibility and recommend the right preparation.
It can. Depending on the paving and product, a sealer may deepen the colour or create a more noticeable wet-look finish; matt options may also be suitable. We will explain the likely appearance and available finishes before application.
Once the product has cured, sweep away loose grit and leaves and clean spills before they settle. We will explain the best cleaning method for the specific sealer used, so you can look after the finish with confidence.
Tell us a little about your driveway and what you’d like done. Add a photo if you have one; we’ll review the surface and get back to you within 24 hours with practical advice and the next step towards a free, no-obligation quote.
Prefer to speak?
Call Us Now
